Foundation Repair Before & After Photos

A customer called because there was some foundation settlement at the front corner of the garage. The settlement had dropped two inches of the side of the garage wall and was being torqued, cracking and was lifting up the brick facade and buckling stucco finish causing structural damage. 

Foundation Supportworks of Idaho installed three Push Piers and was able to lift and stabilize the front corner of the garage. 

This basement wall crack worried the homeowners, and they needed a long-term solution. That's why they chose our Flexispan© repair system. The crack is sealed with a bead of special, flexible sealant that will slow and, in many cases, stop the flow of water through the crack. Then, a Flexispan© foam drain strip is attached over the crack, which is a second line of defense against seepage - sending the water into the drainage below.

A homeowner in Idaho Falls faced the unsettling problem of wall buckling, compromising their home's safety and overall integrity. Spotting the distress in the 'before' photo highlights the issue clearly. Responding to their call, we implemented EverBrace, a sturdy and effective solution renowned for stabilizing and restoring structure. The transformation, visible in the 'after' photo, not only rectified the wall but assured a safe, secure foundation. We're proud to deliver peace of mind with every job, ensuring your home stands strong for years to come.

The concrete walkway was separated and settling from the house. This was causing water
to get into the home's basement. We were able to lift the slab using our 
Push Slab Piers system.  After we lifted the slab we installed waterguard and a sump pump in the basement. This was done to prevent any future water issues in the basement.

We originally came out to this home to check for settlement. We determined that it needed to be stabilized and by doing so we installed our piers to stop the home from moving.